Danfoss Compressor SZ240A6XB

09/06/2020

Application of medical air compressor and supporting nitrogen generator industry

Many friends are not very familiar with the nitrogen generator, and do not know what it is used for. Now I will briefly explain the nitrogen generator and its supporting equipment. Introduction to 　　 Nitrogen Generator

08/21/2020

Why the air-conditioning supplyreturn water temperature is 7℃-12℃

Reason analysis of 7 degree water supply: 　　 1. Starting from the refrigeration unit, the refrigerant evaporates in the evaporator and absorbs heat to cool the secondary side water. If the evaporation temperature is too low, it will cause frost on the surface of the evaporator and affect the heat transfer efficiency.

08/07/2020

How to improve the cooling efficiency of ground source heat pumps?

Generally speaking, if you want to improve the cooling efficiency of the ground source heat pump air conditioner itself, you need to consider many favorable factors before installation. To ensure the energy-saving operation of the unit, you can consider the following aspects.

08/07/2020

Air source heat pump heating in winter

The air source heat pump is used as the cold and heat source of the central air conditioner. Its advantage is that one machine is used for two purposes.

11/22/2024

Common Error Codes for Mitsubishi Heavy Industries Central ACs and How to Deal with E43 Code

Mitsubishi Heavy Industries Central Air Conditioner Fault Codes are a diagnostic tool that can help you determine what is wrong with your air conditioner. When your air conditioner malfunctions, a code will appear on the control panel. Here are some common Mitsubishi Heavy Industries central air conditioner fault codes.

12/31/2021

Air Conditioner Refrigerant Leakage & Solutions

An air conditioning refrigeration system is composed of a compressor, condenser, throttling valve, evaporator, and connecting copper pipe and many other parts and accessories.

08/17/2020

Causes and treatment of cracks at the inlet of the cooler

The crack at the inlet and outlet of the cooler is a kind of brittle crack, which is generally manifested as a crack at the tip of the toothed plate, and then cracks along the intergranular.

08/16/2020

How to install a water-cooled screw chiller

Before using the water-cooled screw chiller, you need to know the installation requirements of the chiller, so that it will reduce a lot of unnecessary troubles during operation.

06/29/2020

How the compressor works

08/09/2020

Why the cold storage must install special lights for cold storage

It is a necessary item to install cold storage lights in cold storage construction. Is it possible to choose general lighting to install in cold storage? What are the benefits of installing professional cold storage lights in cold storage?