Eltra Encoder EL63D100Z5/28L8X3JR

08/24/2020

Do cold storage maintenance, you must understand this knowledge!

1. "Three Preventions" of the Refrigeration System 　　 1. Prevent the evaporation temperature from being too low 　　 The increase in the temperature difference between the evaporating temperature and the warehouse temperature will make the evaporating temperature too low

09/07/2020

How to choose an air compressor in the food industry

Compared with other production-oriented industries, food safety is more important in the food industry. When choosing an air compressor, choose oil-free air compressors, which are also screw type, in order to ensure product quality.

09/10/2020

The status quo and development trend of China's gate valve market

Gate valves have the longest history of use, and are still used in various countries around the world, especially below DN300mm, which still dominate in various types of valves. The characteristic is that the pressure difference between the front and rear of the valve plate forces the valve plate to press on the valve seat on the right side of the outlet, with good sealing performance, and when the valve plate is fully opened, the pressure loss is small because the valve plate does not remain in the flow path. Used to cut off the medium in the pipeline.

10/31/2021

Study on the Performance of Single Phase AC-DC-AC Inverter Circuit

Variable Frequency Drive(VFD) converts power in the motion control system. The motion control system now contains a variety of disciplines.

06/29/2020

What is the cause of compressor pipeline vibration

06/14/2020

What is the difference between heating 24 ℃ and cooling 24 ℃

Regardless of the room temperature, as long as the air conditioner is in the cooling mode and is in a working state, the wind blown out is cold wind. To put it bluntly, the temperature of the blown air is determined by the operation mode of the air condit器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥

08/27/2020

Is it the best companion for air-jet looms Centrifugal air compressor saves energy consumption by 30%!

With the continuous development of modern textile technology, compressed air has been widely used. Compressed air in the textile industry is used in pneumatic pressurization, pneumatic weft insertion, air jet twisting,

07/18/2020

reasons why the constant temperature and humidity test chamber does not cool

1. Introduction The phenomenon that liquid refrigerant and/or lubricating oil damage the suction valve plate when the gas is sucked into the cylinder of the compressor, and it is produced when the piston is compressed when the piston is close to the top dead center and is not quickly discharged during the exhaust process after entering the cylinder.

08/05/2020

Why does the heating system lose water

1. Why does the compressor produce overheat protection? The working principle and classification of the overload protector. The overload protector of the compressor for air conditioning generally adopts a snap-type bimetallic protector,When the pipeline is filled with water, a large amount of dissolved oxygen is mixed into it to cause corrosion; the insulation shell of the directly buried pipeline is disconnected and is subject to long-term soaking of groundwater to cause corrosion.

09/13/2022

Differences between a Sensor and an Actuator

A sensor is a detection device that can sense the measured information, and can transform the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission