Fanuc Module A06B-6151-H011#H580

08/19/2020

Factors affecting the cost of cold storage projects

With the large-scale use of cold storage projects in daily life, consumers of cold storage installations are very concerned about the cost of cold storage projects. Many consumers will ask

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

08/20/2020

What to do when the industrial chiller encounters a water cut

All kinds of failures can be encountered in long-term use of industrial chillers. For industrial chillers, if there is a water cut problem, it is very dangerous and must be dealt with in a timely and effective manner.

06/14/2020

The reason for the failure of the multi-line air-conditioning compressor is revealed!

The reason for the failure of the multi-line air-conditioning compressor is revealed! 1 Overview The failure of motor compressor (hereinafter referred to as compressor) can be divided into motor failure and mechanical failure (including crankshaft, co器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ

09/04/2020

Air compressor inverter will overheat The reasons and measures are here

The high temperature in summer often causes high temperature failure of the air compressor. At the same time, for the air pressure of the frequency conversion control, it is easy to cause the high temperature problem of the air compressor frequency converter.

08/19/2020

How to dehumidify the refrigeration system of industrial refrigerators

The water content in the industrial refrigerator system comes from two aspects. One is that the vacuum is not in place, so that air and water vapor remain in the system. The other is that the

08/20/2020

What is an air conditioner pressure sensor

The pressure sensor is a device that is installed on the pipeline of the outdoor unit of the air conditioner to perform pressure detection. The pressure detection result is transmitted to the computer board to control other parts of the air conditioner.

06/29/2020

Compressor protection measures against liquid strikes

Compressor protection measures against liquid strikes When too much liquid enters the cylinder and it is too late to discharge it from the exhaust valve, a liquid blow will occur in the cylinder. The high pressure generated during the liquid blow damages the cylinder, piston, connecting rod, etc., so it is necessary to take a Series of protective measures.

06/18/2020

Application rate of air conditioning fans and how to clean and maintain

The air-conditioning fan is a new type, energy-saving, high efficiency, variable speed, low noise centrifugal fan. This type of fan has a compact structure, easy installation, small volume, large air volume, high pressure and low vibration. It is equipped with three-phase voltage regulation The device or frequency converter can implement stepless speed regulation. It is especially suitable for ventilating and ventilating places with strict noise requirements and large air volume changes. It is an ideal supporting product for air conditioning and purification industries.<img src="{{media url=&quot;wysiwyg/Application_rate_of_air_conditioning_fans_and_how_to_clean_and_maintain.jpg&quot;}}" alt="" />

08/19/2020

The role of refrigerant in air-cooled chillers

The refrigerant itself circulates continuously in the refrigeration system, and then realizes refrigeration through its own state changes. The refrigerant absorbs the heat of the cooled medium in the evaporator and vaporizes