Fanuc Servo Motor A06B-2045-B100

07/17/2020

refrigerating system

4.1 Pressure vessels and pipelines are often contacted by refrigeration and air-conditioning technicians;; components of various systems; for example, placing an R--22 refrigerant storage tank on the rear panel of a car with a common barrier; The hot summer sun can make the temperature of the steel pipe reach 110F; the total area of

06/21/2020

Working principle of reciprocating compressor_Working process of reciprocating compressor

Working principle of reciprocating compressor<img src="{{media url=&quot;Working_principle_of_reciprocating_compressor.jpg&quot;}}" alt="" />_Working process of reciprocating compressor Working principle of reciprocating compressor 　　 Relies on periodic changes in the working volume of the cylinder to compress the gas to achieve the purpose of increasing the working pressure. (The reciprocating movement of the piston in the cylinder causes the decompression to suck the gas, and then compress the gas to a certain pressure and send it out.) The working principle of the piston compressor.

08/21/2020

What are the hazards caused by the air entering the condenser of the freezer

The handling of water-cooled chiller failures must strictly follow scientific procedures. The chiller operator should not act without authorization and disassemble the water-cooled chiller at will when the situation is unclear,

07/31/2020

How should centralized air conditioners be used during epidemic prevention and control

Before using the centralized air-conditioning ventilation system, you should understand the type of the centralized air-conditioning ventilation system, the air supply range, and the air intake of the fresh air

06/29/2020

How the compressor works

12/13/2021

How to Add Encoder to Stepper Motor

When the current flows through the stator winding, the stator winding produces a vector magnetic field. The magnetic field will drive the rotor to rotate an angle, so that the direction of magnetic fields of the rotor is consistent with that of the stator.

08/19/2020

How to judge whether the refrigeration equipment is in normal working condition

The relevant valves and equipment in the system are in their proper state. The compressor suction and discharge valves, the inlet and outlet valves of the oil separator, and the inlet and

06/14/2020

Refrigeration compressor motor burnout detection and maintenance methods, quickly collect it!

Refrigeration compressor motor burnout detection and maintenance methods, quickly collect it! What are the methods of detection and maintenance of refrigeration compressor motor burnout? Do your friends know? Let's get to know more with the coldest bacte器2䀀

07/16/2020

How to see if the refrigerant leaks in the high and low temperature test chamber

How to check whether the refrigerant leaks in the high and low temperature test box; the standard high and low temperature test box and the constant temperature and humidity test box are all selected by the air-cooled compressor, and the working principle is the same as that of the air conditioning refrigeration

02/01/2023

What is Gear Ratio?

Gear ratio, i.e., the reduction ratio of the reducer, refers to the ratio of the instantaneous input speed to the output speed in the reduction mechanism, and is represented by the symbol "i".