What are the hazards caused by the air entering the condenser of the freezer

What are the hazards caused by the air entering the condenser of the freezer

The handling of water-cooled chiller failures must strictly follow scientific procedures. The chiller operator should not act without authorization and disassemble the water-cooled chiller at will when the situation is unclear, the fault is unknown, and there are countless hearts. The consequence of this is not only the failure to find the cause of the failure, but also the expansion of the failures that have occurred in the water-cooled refrigerator, or cause new failures, and even cause serious damage to the water-cooled refrigerator.

If the user's running water-cooled chiller suddenly fails, the water-cooled chiller should be shut down first, and then the chiller should be carefully and carefully inspected on site to understand the working status of each component of the water-cooled chiller when the failure occurs , Determine which part of the water-cooled chiller is malfunctioning, and what is the extent of its damage.

　　 After determining the occurrence of the failure of the water-cooled chiller and taking emergency measures, the operator of the water-cooled chiller should get in touch with the manufacturer of the water-cooled chiller in time to explain in detail the location of the failure and the fault condition. Only after the factory arranges maintenance technicians to arrive at the site, can they start up the water-cooled chiller or auxiliary equipment that can be operated in a short time without further deterioration of the fault even though there is a fault, so as to accurately analyze the cause of the fault. The basis of perceptual knowledge.

　　 In addition, the maintenance technician can analyze the cause of the failure by checking the operation record of the water-cooled chiller. In particular, we must pay attention to the different normal operating data and the problems that have occurred in the record table, as well as the operating time and reliability of the replaced or repaired parts, and understand the safety protection shutdowns caused by any reason. These are related to the occurrence of failures. Close relationship, especially cannot be ignored.

If the user wants to ensure that the water-cooled chiller can operate normally, safely and stably for a long time 24 hours, it is recommended to configure an additional water-cooled chiller as a backup if conditions permit, even if one of the water-cooled chillers is because Long-term operation leads to inevitable failures, and a standby water-cooled chiller can also be started to work without affecting the user's demand for refrigeration.

　　Finally, and the most important point, I hope users can pay attention to it: the water-cooled refrigerator must be cleaned and maintained regularly. After all, no matter what kind of machine equipment, long-term coupling operation or friction will definitely wear each component of the equipment. The longer the operation time, the more failures and components will occur, and the service life will be greatly reduced. Regular maintenance of the chiller is equivalent to spending the least money and ensuring the long-term use of the chiller to the greatest extent.