ISCAR Tool for Metal Cutting F75AP D50-22

07/27/2022

Classification of Vane Pumps

During a rotation cycle, the volume between adjacent vanes changes because of the rotor’s eccentric mounting position. This creates the pumping action.

04/01/2025

FANUC Common Fault Alarm Analysis

1. The system alarm displays 9056, and the <a href=”url”>FANUC spindle amplifier</a> alarm code displays 56.

06/14/2020

In doing so, there is no need to worry about reversing the refrigeration compressor! (technology sharing)

In doing so, there is no need to worry about reversing the refrigeration compressor! (technology sharing) When the refrigeration compressor unit is in normal operation, it should also be checked accordingly to prevent the refrigeration compressor from re器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ

05/19/2022

PLC Analog Input

PLC analog inputs usually use voltage signals in the range of 20 volts and current signals in mA. Each PLC manufacturer has I / O modules to process these types of signals

07/08/2020

This is the key method to solve the leakage problem of fan coil

The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.

09/15/2020

84 water well liquid level sensor, anti-corrosion cable transmitter

84 water well liquid level sensor, anti-corrosion cable transmitter okmarts.com pressure sensor, okmarts.com pressure transmitter, okmarts.com pressure sensor PTH601 uses diffused silicon piezoresistive core or ceramic piezoresistive core, 316 stainless steel structure, mainly suitable for rivers, groundwater levels, reservoirs, water towers and containers, etc. liquid level measurement and control.

06/21/2020

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

04/12/2024

Servo Motor Applications: a Complete Guide

Servo motors are widely used in various mechanical equipment. It has the characteristics of fast response, high precision and high reliability, and can achieve precise position control, speed control and force control.

06/30/2020

You should know the normal working condition of the compressor in the cold storage

You should know the normal working condition of the compressor in the cold storage 1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature.