KOYO Encoder TRD-GK2500-RZW

09/03/2020

Eliminate useless consumption of compressed air

Identify, repair and prevent leakage 　　Leaks may cause problems in the system, resulting in more energy consumption and expensive resources to solve the problem. It is very important to identify and repair all leaks,

09/08/2020

Introduction of micro heat regeneration adsorption dryer

The non-thermal regeneration suction dryer uses the compressed air pressure change, adsorption under high moisture pressure, and desorption under low moisture pressure to regenerate the adsorbent.

08/17/2020

The setting of fire damper in HVAC system

In the HVAC design, there are many types of valves for fire prevention and smoke exhaust, and the valve settings are different for different applications.

06/21/2020

Composition principle of refrigeration system of refrigerator

Composition principle of refrigeration system of refrigerator Refrigerators have a larger cooling capacity than household refrigerators, and there are more refrigerants filled in the system. Therefore, a liquid storage tank is installed on the pipeline between the condenser and the filter, and a shut-off valve is installed on the tank to shut down the system for a long time. When closing the shut-off valve, the refrigerant liquid is stored in the tank.<img src="{{media url=&quot;Composition_principle_of_refrigeration_system_of_refrigerator.jpg&quot;}}" alt="" />

09/04/2025

AC Compressor Bearing - Working Principle & Troubleshooting

Bearings play an irreplaceable role in mechanical design. They involve very wide applications.

06/14/2020

Correct treatment method after refrigeration compressor burned out

I. Introduction: 　　If the compressor burns down or mechanical failure or wear has caused the inevitable pollution of the refrigerant system, the situation is as follows:

09/16/2020

The development of screw air compressor

Since the advent of screw compressors in 1934, after decades of technological improvement, screw compressors have been widely used, especially in refrigeration.

08/13/2020

Popularization of cold chain technology analysis of the advantages and disadvantages of 5 types of compressors

There are mainly five types of compressors, piston compressors, rolling rotor compressors, turbo compressors, screw compressors, and centrifugal compressors. This article briefly introduces the advantages and disadvantages of various compressors.

06/29/2020

What is the cause of compressor pipeline vibration

07/19/2020

Classification of refrigeration compressors for chillers

In the internal structure of industrial chillers, compressors are basically necessary, so how are the compressors in different equipment classified? Chillers are classified into refrigeration compressors according to different refrigeration conditions: