I realized that in winter, the refrigerator should be adjusted correctly, and the power saving and cooling are correct.

I realized that in winter, the refrigerator should be adjusted correctly, and the power saving and cooling are correct. I believe that there should be a refrigerator in the home of the friends, the role of the refrigerator is to freeze and refrigerate the food in the home. Preventing food from decay, especially in summer, the refrigerator can really be a hero. It saves us a lot of food expenses, but the temperature difference between summer and winter is too big, so should the refrigerator use method be changed? The answer is yes. The method of using the refrigerator is actually very simple. In fact, there are just a few switches, but don't underestimate these switches. It is these switches that determine how the refrigerator works. Especially the adjustment of gears is still a little learned. I only learned today that the refrigerator should adjust this switch "correctly" in winter, saving electricity and cooling, and benefiting from it! 1. Temperature Regulator Many people think that if you turn it up in summer, why not turn it down in winter? Isn’t that a lot of attention? Although this method works, but if you turn it down accidentally, the cooling effect is particularly poor. Refrigerator It will still operate as usual, so it will consume power, which is very impossible. The following editor will teach you how to properly adjust the refrigerator gear. When the refrigerator is set at the factory, it is generally about 1 gear, so that it can be used normally no matter what season it is in. In summer, we can adjust the gear up to improve the cooling effect, but it will consume more power. In winter, you should choose another gear to modulate. 2 gear is a good choice, so that it can operate as usual to maintain cooling, and the power consumption is still at a relatively balanced level, not too much power consumption. It will not spoil the food, and the temperature will be low in winter, so the second gear is okay, which saves electricity and keeps fresh. 2. Food placement In the general concept of people, the less food is stored in the refrigerator, the power is saved. In fact, it is not the case. The empty the refrigerator, the larger the cooling space and the more power consumption. The correct approach is to load the refrigerator with the right amount of food When the air is reduced, the refrigerator compressor will not be turned on frequently, which naturally saves electricity. Then there is a gap of about 10 cm on both sides, so that the air circulation is smooth and the refrigerator cools well. How to solve the problem of freezing in the refrigerator: In addition to properly adjusting the refrigerator, we also need to pay attention to the seal of the refrigerator. Many people's refrigerators are always frozen, usually because the seal is deformed and leaks. The hot air from outside gets inside, which can cause ice inside. We can take a piece of paper between the door cracks, and then pull it out to see if it is stressed. Check if the seal is intact. If it is deformed, there is a trick. Use a blower to blow the seal. The hot air makes the seal easy. Shaping, close the door after blowing, press tightly, let the sealing strip cool and set, so that the problem of deformation and leakage of the sealing strip can be repaired, and it will not be easy for the refrigerator to freeze in the future. I only learned today that the refrigerator should adjust this switch "correctly" in winter, saving electricity and cooling, and benefiting from it! Have you learned it?