Large oil consumption of the unit or high oil content of compressed air

Large oil consumption of the unit or high oil content of compressed air

The amount of lubricating oil is too much. The correct position should be observed when the unit is loaded. At this time, the oil level should not be higher than half;

The return pipe is blocked;

The installation of the oil return pipe (the distance from the bottom of the oil separation core) does not meet the requirements;

Exhaust pressure is too low when the unit is running;

The oil separation core is broken;

The internal partition of the separation cylinder is damaged;

The unit has oil leakage;

Lubricating oil has deteriorated or has been used for an extended period.