Precautions for cold storage acceptance

Precautions for cold storage acceptance Probably pay attention to the acceptance content during acceptance: 1. Appearance acceptance of the cold storage body: Whether the installation of the cold storage body is coordinated, whether the connection between the storage board and the storage board is tight, whether the cold storage door installation is stable and thick, whether the sealant seal is tight and leak-free, whether the plastic strips around the cold storage door and the door frame are firm, and whether the ground is smooth. Precautions for cold storage acceptance Second, the acceptance of indoor and outdoor hosts: The cold storage is not only dependent on the temperature of the cold storage during the acceptance, but the installation of the outdoor host also needs to see whether it is stable and whether the small welding parts of the host are loose. The host should not be placed outside in the open air, as far as possible. Parts of the external mainframe that are exposed to rain and sunlight are more prone to corrosion and rust, and after long-term operation, some parts are loose. Whether the indoor fan installation is firm, whether the pipeline installation is standard, whether the airtightness test results are confirmed, and whether the cold storage is tightly sealed (to see if it is breathable and transparent) and whether the auxiliary equipment is installed. 3. Operation acceptance of refrigeration system: The indoor and outdoor fan work and steering conditions, whether the control system accurately meets the requirements, whether the auxiliary equipment is working properly, and the cold storage operation data records (actually measured data) After the cold storage body is generally completed, the main part of the acceptance items are these, and each contractor also The project will be checked and accepted before it is passed to the customer.