Precautions for cold storage installation
Library refers to the use of artificial means to create an environment different from outdoor temperature or humidity. Pay attention to the following points when installing cold storage:
1. When installing the cold storage, the construction check must be strict. When the design temperature difference between the two sides of the enclosure structure is equal to or greater than 5℃, an air barrier should be installed on the side with higher temperature." If the control is not strict and the implementation is not in place, it will seriously affect the quality of the food cold storage. Therefore, the construction must be strictly controlled to ensure the quality. Moreover, good insulation boards, such as polyurethane, must be selected.
2. In the cold storage installation, there are some misunderstandings about the moisture-proof and air-proof insulation layer of food cold storage. From the beginning of the design, there is a wrong understanding of the working principle of the cold storage and the influence of the external environment on the operation of the cold storage. It does not have a big impact on the insulation effect of the cold storage, and some people think that there is no big difference between what materials are used for doing and not doing it. Therefore, the design of this pass must be checked in place.
3. The top plate of the cold storage equipment should not be piled up with debris, otherwise the food cold storage board will be deformed and affect the insulation performance. Keep the channels around the cold storage unobstructed to ensure good heat dissipation. The location of the cold storage installation should be kept dry, clean, free of flammable and explosive materials, and ensure that there are no safety hazards. A certain gap must be reserved before the evaporator to avoid affecting the cooling effect.

Related Info
Problems related to refrigerant charging Various problems that may occur in central air conditioning What to do if the air conditioner protection light is flashing and not cooling What should be paid attention to to make cold storage more energy-efficient? Comparison of cabinet machine and duct machinePrecautions for cold storage installation
Subscribe to relevant news content?
Subscription
Unsubscription
Recent related posts
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
US$2307.69
Panasonic Servo Motor MHMF022L1V2M
US$653.85
Honeywell Solenoid Valve VE4025B1045
US$334.62
ROTEN Mechanical Seal 8E5K-22-X
US$384.62
SKF Bearing 1317 EKTN9
US$151.23
Leuze Sensor ODS 96B M/V6.01-600-S 12
Contact Us
TAIAN VFD Frequency Converter N310-4008-S3X
Contact Us
Contrinex Sensor DW-AD-624-M8-177
Contact Us
Advantech Power Supply FSP300-60PLN
US$83.85
Nemicon Encoder HEF-08-2MHT
US$213.45
PEER Bearing HCP214-70MM-Q32
US$68.85
SKF Bearing NJ 205 ECM/C3
US$47.31