Principles that need to be followed when using antifreeze in industrial chillers

Principles that need to be followed when using antifreeze in industrial chillers

The role of antifreeze for industrial chillers is to prevent expansion and cracking of heat exchangers, pipes or engine cylinder blocks due to the freezing of the coolant. Therefore, in the operation and use of industrial chillers, it is necessary to replace the antifreeze of the chiller in advance. The replacement of a suitable antifreeze is very critical for the stable operation of the equipment and the extension of the service life.

　　 When choosing antifreeze, you must first consider the use environment. Although many companies believe that the higher the concentration of antifreeze, the higher the operating safety of the equipment. In fact, on the contrary, which antifreeze is replaced by industrial chillers requires careful analysis based on the long-term operating environment of the company.

Only when the concentration of antifreeze can meet the requirements of the operating environment of the enterprise can the safety of the enterprise using industrial chillers be guaranteed. Otherwise, the company’s replacement of the chiller has no practical meaning, and it may even cause the enterprise to waste the cost of replacing the industrial chiller. It is not conducive to the long-term use of industrial chillers by enterprises.

　　As an enterprise, if the antifreeze of the equipment has deteriorated and other serious problems, it is very unfavorable for the enterprise. The long-term stable operation of the equipment can be guaranteed if the equipment can be tested carefully and the high-quality antifreeze products can be replaced regularly. The higher the stability of the equipment operation, the longer the life of the enterprise using the industrial chiller.

　　 Companies using chillers need to replace antifreeze products in time, because different antifreeze products have different methods during the replacement process. Being able to control the equipment replacement cycle and choosing antifreeze products suitable for enterprise equipment can extend the service life of the equipment. The longer the life of the industrial chiller used by the enterprise, the lower the various operating costs incurred by the enterprise.

　　 It should be noted that the company must follow the following important principles in the use and replacement of antifreeze:

　　 1. The concentration should be as low as possible. Because it is corrosive to a certain degree, the lower the concentration, the safer it is to meet the antifreeze performance of industrial chillers.

　　2, the shorter the time used, the better. Any kind of substance has a certain time limit. For example, antifreeze will deteriorate if it is used for too long. After the deterioration, the antifreeze will be more corrosive and the viscosity will also change. In order to ensure the safe and stable operation of industrial chillers, companies must Pay attention to regular replacement.

　　 3. Do not mix different brands of antifreeze. When each manufacturer produces antifreeze, it uses different ingredients and different additive formulas. Therefore, do not mix different brands and different types of antifreeze to avoid chemical reactions, precipitation or bubbles, which will affect industrial cold water. The machine runs stably.