What should I do if wall cracks appear after the cold storage is built
After the construction of the cold storage project, there may be many problems. For example, we have seen a lot of news recently. It is said that the wall cracks appeared after the construction of the cold storage. The emergence of this phenomenon is also for enterprises. It will cause a certain economic loss, and it will also push the quality problem of cold storage construction to the forefront. Today we will accompany Kuhua Refrigeration to understand how to deal with such a phenomenon after the construction of the cold storage?
Even if the cracks appearing after the construction of the cold storage are not serious, the harmfulness cannot be ignored. At this time, we must deal with the occurrence of cracks in a timely manner. Most of it is because the foundation of the cold storage is not It is caused by uniformity, and it may also be caused by temperature stress. If the wall is severely cracked, it will definitely cause the strength of the cold storage and the service life to be seriously affected, although some cracks are relatively small, which is very important for the structure. The strength will not be affected, but it may cause serious damage to the insulation layer of the wall, and will also allow rain or water injection to enter the insulation city of the cold storage, which will cause the insulation material The normal use effect is lost due to dampness.
What should I do if wall cracks appear after the cold storage is built?
After the cold storage is built, the phenomenon of cracks in the cold storage wall is most likely to appear vertical cracks at the corners of the outer walls, or horizontal cracks above the wall, then how should such cracks occur? Kuhua Refrigeration is for everyone.
First of all, we should understand what causes the cracks? Taking basic measures to deal with the causes of cracks, such as strengthening the structure, can ensure the safety of the cold storage project. For cracks that have occurred, if the width of the gas barrier is damaged, there is no way to go further. At this time, we need to use steel drills to make a groove. The depth of the groove should be about three millimeters deeper than the original gap. The inside of the gap should also be cleaned, and then the gap grease or pitch hemp wire should be filled in. In the gap, there is no need to do other reinforcement treatments at this time, but we should also observe regularly in the later period. If the width of the crack is still expanding, it is likely to cause damage to the gas barrier, then it must be To find other methods, if the crack is caused by temperature stress, then you need to take corresponding measures according to the specific situation.
Experts said that after the construction of the cold storage, if the wall cracks are more serious, it must be paid more attention. If necessary, production must be stopped for major repairs to ensure the normal use of the cold storage to avoid occurrence in the later use. Safety accident.
What should I do if wall cracks appear after the cold storage is built
Recent related posts
-
08/15/2020
What should I do if wall cracks appear after the cold storage is built
After the construction of the cold storage project, there may be many problems. For example, we have seen a lot of news recently. It is said that the wall cracks appeared after the construction of the cold storage
-
08/15/2020
What should I do if the refrigeration performance of industrial refrigerators declines
When many enterprise users use industrial refrigerators, due to the lack of knowledge about the use and maintenance of equipment, industrial refrigerators are prone to various failures
-
08/15/2020
What should I do if the refrigeration equipment does not operate normally
Nowadays, in order to prevent the goods from selling well and causing economic losses, more and more businesses are using Xuzhou refrigeration equipment to store excess goods or sell them in anti-seasonal times.
-
08/15/2020
What should I do if the cold storage is moldy How to physically remove mildew
Mold generally grows in dark and humid places and can adapt to lower temperatures. Usually in high temperature storage, the situation is serious. Mold grows in the cold storage, and the spores will fly everywhere, which will contaminate the goods and products stored in the storage.
-
08/15/2020
What should be paid attention to when handling refrigeration equipment
Precautions for the handling of refrigeration equipment-Do not put it down during transportation. A series of matters must be paid attention to during the transportation of refrigeration equipment.
-
08/15/2020
What are the matters needing attention when installing rock wool board in cold storage
Many businesses now have their own cold storage and install semi-hermetic refrigeration compressors, through which food can be well preserved. So what should we pay attention to when installing rock wool board in the cold storage.
-
08/15/2020
Three points to make industrial chillers more energy-efficient
In the lives of modern people, everyone advocates energy saving, power saving, environmental protection, saving existing energy consumption, and advocating the development of
-
08/15/2020
The price of industrial chiller is too low, what should you pay attention to
Industrial chillers are commonly used temperature control equipment and are used in various industries. Therefore, the requirements for use are also different. The requirements for laser and
-
08/15/2020
The peak of air-conditioning installation is coming
"The free installation was stated at the time of purchase, but not only did the on-site installation charge for materials such as external machine brackets and copper pipes, but also charge for labor.
-
08/15/2020
The main cause of cold storage fire is cold storage installation or cold storage construction
In recent years, we have seen a lot of news about cold storage fires. Once a cold storage causes a fire, it will not only cause economic losses to us, but also may cause safety problems.
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
Omron PLC NX-PC0020
Schneider Circuit Breaker LV525473
Yaskawa Servo Drive FSP-10AMH
Ebmpapst Fan G1G133-DE19-21
Banner Sensor Q40AW3LPQ21