Servo Fan PA55H3-C

08/11/2020

How to solve the irritating computer room air conditioning noise

According to relevant surveys, the noise generated by abnormal air conditioners is often the most unbearable sound pollution for consumers. The vibration and noise of the air-conditioning equipment in the computer room (fans, chillers, water pumps, cooling towers, etc.)

09/10/2020

Design principle of vacuum oil filter

The vacuum oil purifier is designed according to the different principles of the boiling point of water and oil. It consists of a vacuum heating tank fine filter, condenser, primary filter, water tank, vacuum pump, oil drain pump and electrical cabinet.

07/15/2020

CO2 Air Source Heat Pump Heating Technology

CO2 air source heat pump heating technology has the characteristics of strong adaptability to outdoor temperature in cold areas and high outlet water temperature. It has a high heating coefficient under the condition of large temperature difference between supply and return water.

12/30/2024

Principles and Differences of 2-wire, 3-wire, and 4-wire Transmitters

2-wire, 3-wire, and 4-wire transmitters refer to the transmitters whose outputs are analog DC current signals.

06/29/2020

How the compressor works

09/11/2020

Thrust bearings

Thrust bearing: Rolling bearing mainly used for bearing axial load, its nominal contact angle is 45-90 degrees. According to the difference of nominal contact angle, it is divided into:

08/11/2020

The key points that should be paid attention to in the process of central air conditioning construction management

1. Preliminary preparations for central air-conditioning construction<br></br> The construction process of the central air-conditioning is a complex and systematic project.

06/14/2020

The reason for the frost on the compressor air inlet is here!

The reason for the frost on the compressor air inlet is here! Frost on the air inlet of the cold storage compressor is a very common phenomenon in the refrigeration system. Under normal circumstances

09/09/2020

Poor compressed air quality has a huge impact on the SMT industry

As the second largest power source after electricity, air has been recognized by the business community. When considering the configuration of SMT production line, equipment selection, and subsequent installation and use,

08/17/2020

What is the reason for the excessive leakage of the refrigeration compressor

1. Insufficient oil flow, increase the oil supply appropriately; 　　2, the assembly sequence of the refrigeration compressor stuffing box is unreasonable and should be assembled according to the procedure;