SG6I06GB SPG Motor​ I. General Specifications​ Poles and Motor Type: The SG6I06GB is a single - phase capacitor - run induction motor with 1 pole. This motor type, featuring a capacitor - run design, ensures reliable operation. Its single - pole configuration impacts its rotational characteristics and power consumption patterns.​ Power Supply: It is designed to operate with a single - phase voltage of 200V. The motor can function across two common frequencies, 50Hz and 60Hz, making it adaptable to different electrical systems around the world.​ II. Performance Metrics​ Duty Cycle: Rated for continuous duty (Cont. S1), this motor is engineered to operate steadily over extended periods. This makes it suitable for applications where consistent power output is required, such as in industrial equipment or continuous - running machinery.​ Rated Load:​ At 50Hz, the rated current stands at 0.10A. The motor rotates at a rated speed of 1250r/min, and it generates a rated torque of 0.46 kgf·cm (46 mN·m). These values represent the motor's performance under normal load conditions at this frequency.​ At 60Hz, the rated current remains at 0.10A. However, the rated speed increases to 1550r/min, while the rated torque decreases to 0.37 kgf·cm (37 mN·m). The change in speed and torque with frequency is a characteristic feature of this motor and should be considered when selecting it for specific applications.​ Starting Torque: Irrespective of whether it is operating at 50Hz or 60Hz, the motor has a starting torque of 0.52 kgf·cm (52 mN·m). This starting torque is crucial as it enables the motor to initiate rotation smoothly, even when connected to a load.​ Capacitor: A 0.8μF capacitor rated at 450V is an integral part of this motor. The capacitor plays a vital role in the motor's electrical performance, specifically in helping to start the motor and maintain its rotational speed.​ III. Protection and Certification​ Degree of Protection: With an IP23 protection rating, the SG6I06GB motor offers a certain level of safeguarding. It can protect against solid objects larger than 12.5mm and water spray from any direction within an angle of 15 degrees from the vertical. This protection level makes it suitable for use in environments where there may be a risk of exposure to such elements.​ Insulation Classification: The motor's insulation is classified as B(130). This classification indicates that the insulation material can withstand a maximum operating temperature of 130°C. Such reliable insulation is essential for ensuring the motor's long - term performance and safety.​ Protected Type: It is impedance - protected, which helps in preventing over - current and over - voltage situations. Additionally, all models within the SG series, including the SG6I06GB, have obtained UL, TÜV, and CCC certifications. These certifications are a testament to the motor's compliance with international quality and safety standards, providing customers with confidence in its reliability and performance.​