TOWA SEIDEN Switch TSA-B1SA-025

08/19/2020

Common mistakes in daily operation of industrial chillers

The operation of the industrial chiller system works through three interconnected systems: refrigerant circulation system, water circulation system, and electrical automatic control system.

08/18/2020

Reasons for the high low pressure value of the chiller

In the application of industrial refrigeration, the chiller is used in conjunction with production and processing equipment, so it runs for a long time. If the customer lacks professional maintenance and routine equipment maintenance for the chiller in daily life

08/24/2020

Comparison of cabinet machine and duct machine

Concealed air conditioner, referred to as air duct machine, can also be called air conditioning duct machine or air duct machine air conditioner.

08/17/2020

How to choose chillers for small factories

At present, the chiller industry is continuously accelerating the pace of development. More and more different types of chillers have emerged, and many small chiller factories have been born.

07/01/2020

How to check the compressor body for cracks

How to check the compressor body for cracks In winter, it is relatively common for compressors to crack. I believe many people have ideas to prevent this kind of problem. In fact, it is not impossible, as long as we conduct a detailed inspection of the compressor body during normal maintenance, this problem can be avoided.

07/27/2020

Ten reasons for the burning of air conditioning compressors

During the starting process of the air conditioner compressor, there is generally a step-down starting circuit, but the starting current will exceed several times the rated current, and the starting temperature of the air conditioner compressor motor will rise very quickly.

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

08/09/2020

Regulations for the adoption of heat recovery chillers in refrigeration stations

1. For buildings that require both cooling and heating, heat recovery chillers can be selected when the technical and economic analysis is reasonable. By recovering the heat lost by the cooling water, the unit is used for air conditioning hot water or hot air preheating,

06/21/2020

Working principle of sliding vane compressor_Features of sliding vane compressor

Working principle of sliding vane compressor <img src="{{media url=&quot;magefan_blog/Working_principle_of_scroll_compressor_Characteristics_of_scroll_compressor.jpg&quot;}}" alt="" /> 　　 Air is sucked in through a filter and a regulating proportional valve. The regulating valve is mainly used to regulate the pressure chamber formed by the rotor and slide of the air cylinder. The rotor rotates eccentrically with respect to the cylinder, the valve plate is installed in the rotor groove, and the slider is pushed to the cylinder wall by centrifugal force.

06/29/2020

Compression ratio of American Copeland compressor