YUKEN Vane Pump PV2R12-8-65-F-REAA-41

08/19/2020

Application of large temperature difference cooling water system in industrial cooling system

In the industrial cooling system, in order to meet the process requirements, small flow materials need to be cooled with a large temperature difference (for example, a certain juice beverage needs to cool the material from 30°C to 5°C

03/17/2021

Several common faults in the spindle drive system of CNC machine tools and how to repair it?

When the vertical machining center supporting FANUC6 system is working, the machine tool vibrated severely, and the AC spindle drive displayed AL-04 alarm. During the vertical machining center supporting FANUC6 system is working, the machine tool vibrates severely, and the AC spindle drive displays AL-04 alarm.

09/11/2020

Several Improvements on the Easy Failure Points of Air Compressor

The original compressor has poor cooling effect and low efficiency. The improvement method is to introduce the water that enters the primary and secondary cylinders and the intercooler directly from the main pipe to the water collecting funnel after cooling.

06/18/2024

Hydraulic Symbols Explained (Hydraulic Pump, Hydraulic Motor, Hydraulic Cylinder, Hydraulic Valve, Accumulator Included)

The hydraulic system, also called a hydraulic pump station, hydraulic station, hydraulic oil station, etc., usually consists of power component, actuator, control component, auxiliary component, and working medium.

08/30/2020

Which position in the machinery industry has a career

The modern development of Payipa machinery technology<br></br> Due to historical reasons, our country has missed the previous industrial revolutions. Mechanical technology has been paid attention to mainly after the founding of the People’s Republic of China.

08/19/2022

Types of Linear Motors

linear motor as the name suggests, is a motor that produces linear motion. The working principle of linear motor

09/05/2020

The problem of motor inefficiency

The test standards promulgated by the International Electrotechnical Commission IEC (hereinafter referred to as IEC) make it possible to evaluate the energy efficiency of motors.

06/29/2020

What is the cause of compressor pipeline vibration

09/09/2020

Calculation method for determining air consumption of air compressor

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m³/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor.

09/10/2020

Analysis of common problems of air compressor oil filter

1.The perforation problem at the bottom of the oil filter The bottom of the oil filter is perforated, except for a few because the steel plate has blisters, but more because of the material problem of the shell steel. Whether the bottom is easy to perforate is related to the thickness of the shell, but it is not the main reason. When the material of the steel is not good