Fluid: Air(to be filtered by 40u m filter element)
Operating pressure:
Double acting: 0.1 to 1.0 Mpa(15 to 145psi)(1.0 to 10.0 bar)
Single acting: 0.2 to 1.0 Mpa(28 to 145psi)(2.0 to 10.0 bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 80
Speed range(mm per second):
Double acting: 30 to 500
Single acting: 50 to 500
Magnet: With magnet
Bore size: 80mm
Stroke: 10mm
AirTAC Air Cylinder Pneumatic ACQD80X10S Model:Compact Cylinder Pneumatic(Double rod)
People who bought this item also viewed
Festo Air Cylinder DGC-18-450-KF-PPV-A
Festo Air Cylinder SLG-18-200-YSR-A
Compact Air Cylinder SD34X12
AirTAC Air Cylinder TR16X10S
AirTAC Air Cylinder ACQ125X50S
AirTAC Air Cylinder MAC40X50SCA
Festo Air Cylinder ADVULQ-12-20-P-A
CKD Air Cylinder LCR-6-20-S2
Festo Air Cylinder ADNGF-25-25-PPS-A
Festo Air Cylinder DSN-10-50-P
Autonics Rotary Encoder E50S8-5000-6-L-5
Belimo Actuator SRF24A-SR
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SOR Switch 54NN-EE118-N4-C2A
Omron Switch VB-6241
Recent related posts
-
07/06/2022
What is a Proportional Valve
A proportional valve provides a change in output pressure or flow in the same ratio as the change in the input, for example if the input doubles then the output will also double.
-
09/10/2020
What problems should be paid attention to when operating the centrifugal oxygen compressor
Compared with air compressors, centrifugal oxygen compressors are characterized by their different working media. Oxygen is a strong oxidizer and combustion-supporting agent. Therefore, there are stricter requirements for safety in design, manufacturing, installation, and use management. E.g:
-
07/28/2022
How to install a Vane Pump
The pump body is installed and fixed on a special foot rest with screws, and the foot rest is fixed on the base plate of the machine and equipment with bolts.
-
06/14/2020
Inspection method of screw refrigeration compressor (technical sharing)
Inspection method of screw refrigeration compressor (technical sharing) 1. Disassembly Before the screw compressor must be overhauled, if possible, unload the slide valve to the "0" position, shut down normally, and cut off the power supply. The pi 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁皦 ᮔDž༬皧煞क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦 ᮔDž '鱤džၜ먢䇨珵呈ᠾ뤂ᐱ ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲ ᠾ 랖僧Ѯ 識 �僬㣢ᐲ 臆S㥲ᐲ ᬄğ
-
08/20/2020
The reason why the compressor of industrial chiller cannot start
What is the reason why the industrial chiller cannot be started? The compressor is the core part of the industrial chiller. If it cannot be started, the entire unit cannot operate normally. When the compressor is started,
-
08/13/2020
Compressor in the industrial chiller system produces wet stroke fault and troubleshooting
In the industrial chiller system, when the compressor sucks in wet steam, frost occurs on the cylinder wall, and the suction temperature and discharge temperature drop significantly. This is the wet stroke of the compressor, commonly known as frost.
-
04/08/2022
Where is the Expansion Valve Located?
Expansion valve, also known as Throttle valve, is an important automatic control component of refrigeration system. It is generally installed between liquid reservoir and evaporator.
-
06/23/2022
HMI Troubleshooting and Maintenance?
HMI (human-machine interface) devices are crucial components of automated systems. An HMI makes it possible for a human to interact with a machine efficiently and productively.
-
09/14/2020
Analysis of common failures of air-cooled compressors (1)
There are three common failures in the main components of air-cooled compressors: 1. Failure of the gas circuit system 2. Failure of the oil circuit system 3. Failure of the transmission mechanism. Do some system analysis below
-
09/04/2020
Have you heard of the 6S management of the compressor station on-site
For compressor users, on-site management is one of the daily management content of each enterprise.