Fluid: Air(to be filtered by 40u m filter element)
Mounting type: Basic FA LB Operating pressure: 0.15 to 1.0 Mpa(22 to 145psi)(1.5 to 10.0bar) Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 70
Speed range(mm per second): 30 to 800
Cushion type: Variable cushion
Bore size:40mm
Stroke:25mm
Adjustable stroke:10mm
Magnet:with magnet
AirTAC Air Cylinder Pneumatic SAUJ40X25-10SAdjustable stroke type
People who bought this item also viewed
Festo Air Cylinder AEVULQZ-16-10-P-A
NEW-ERA Air Cylinder PXY-SD12-1-LF
AirTAC Air Cylinder SC50X250S
AirTAC Air Cylinder ACQ32X30S
AirTAC Air Cylinder TCL12X50S
AirTAC Air Cylinder ACQ40X10S
Festo Air Cylinder DNC-32-125-PPV-A
MINDMAN Air Cylinder MCKB-32M-B
AirTAC Air Cylinder HRQ20A
Festo Air Cylinder ADN-50-15-I-P-A
HENGSTLER Encoder RI58-O/2500AK.42KB
CML Solenoid Valve WH43-G02-B3S-A240
SIEMENS Actuator GCA135.1E
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
HENGSTLER Encoder RI58-O/1024AQ.46RB
ARK Air Cylinder KCXSM25-10
Kompass Vane Pump 150T+50T-61+07-LR
UNIQUC Air Cylinder DEB32M350
Recent related posts
-
06/14/2020
Brief introduction of magnetic suspension refrigeration compressor technology
Magnetic bearing is a high-tech product. Due to its high price, it was only used in aerospace engineering in the past. In 1993, Australia Multistack established a TURBOCORRD department, specializing in the application of magnetic bearings in refrigeration ﰸ2 䀀 ᅵ皥 䖒皦즠Ʋ娼ི 㲈Ʋ 䌁皦隆 ᮔDž༬皧婆ིЀ 呄ᠾ鹨់༹皧 ࠄ 00븹먱댁珵理뛐珵Љ 䕄ྦ 뤂ᐱ變뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់變ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V
-
06/14/2020
An accident analysis of refrigeration compressor
An accident analysis of refrigeration compressor A major refrigerator damage accident occurred in the refrigeration workshop of a meat joint processing plant. The refrigeration workshop of the factory was equipped with 2 single-stage two-stage ammonia re 器2 䀀 ᅵ皥 䖒皦즠Ʋ嫜ི 㲈Ʋ 䌁皦 ᮔDž
-
08/08/2020
What are the cold storage boards and how to buy them
What are the cold storage boards and how to buy them What are the cold storage boards? How do I know which specifications and models of cold storage boards are needed for the cold storage I build?
-
03/09/2022
Why is Your Refrigerator Start Relay Bad
Refrigerators have been necessary for people’s daily life and there are probably some problems with your refrigerators
-
06/24/2022
6 Common Faults of Encoder?
If motion control is important to your production, then your encoder is one of the keys to your success. Encoders are exposed to shock, contaminants/oil, excess vibration, moisture
-
06/14/2020
Fresh air system allows you to breathe fresh air at home for 24 hours
Fresh air system allows you to breathe fresh air at home for 24 hours In recent years, poor outdoor air quality has caused sensitive people to induce respiratory diseases;
-
07/13/2020
Danfoss medium temperature refrigeration compressor M series
liquid 1. Liquid back: When the refrigerant returned to the compressor is not a pure gas state, but contains liquid, the influence of the liquid refrigerant on the compressor is negative. If there is too much liquid, it may even cause liquid shock, even if there is no liquid shock, it will happen. Wet compression causes oil to run away.
-
12/12/2022
Differences between Rolling and Sliding Linear Guideways
Linear guideways are often referred to as guides for short, and their function is to support and guide moving parts for linear reciprocating motion along a given trajectory and stroke.
-
06/26/2020
Analysis of common faults and solutions of air-conditioning compressors
The air conditioning compressor is the heart of the refrigeration system and the power source for the refrigerant to circulate in the system. The basic working principle of the refrigeration system mainly includes the four processes of compression, condensation, throttling and evaporation.
-
07/21/2020
Ten basic performance parameters of refrigeration compressors (technology sharing)
Under a certain working condition, the gas mass delivered from the suction end to the discharge end per unit time is called the compressor mass air delivery under this working condition, and the unit is. If calculated according to the volume of the inhalation state, the volume of the air delivery is, and the unit is then