CKD Air Cylinder SSD2-L-16-10-TOH3-R-W1

08/16/2021

How to Put Freon in a Refrigerator Compressor

As we all know, the most important reason why refrigerators and air conditioners can be cooling is that the Freon.

01/22/2025

How to Install Encoders - Best Practices

The wiring and installation of rotary encoders should be conducted in strict accordance with the instructions of each product.

07/20/2022

Structure and Working Principle of Diaphragm Pump

Diaphragm pump is a novel mechanical transportation equipment, which can absorb all kinds of corrosive liquids, liquids with particles, and liquids with high viscosity, volatile, flammable and highly toxic.

08/24/2020

Six questions about air conditioning This is what novices really need!

1. Even though the heat pump air conditioner has automatic defrosting, why the heating effect below -5℃ is not good?

12/06/2020

The working principle of oxygen generator (oxygen machine)

The working principle of oxygen generator (oxygen machine) The oxygen generator adopts pressure swing adsorption (PSA)-pressure adsorption and atmospheric pressure desorption (HP) method. After the raw material air is pressurized by an oil-free compressor,

09/18/2020

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them Mineral oil (MineralLubricant) Mineral oil is a lubricating oil extracted from petroleum. The base oil of mineral oil is the bottom oil left over after the fractional distillation of useful light substances (such as aviation oil, gasoline, etc.) during crude oil refining. Into the product. Essentially, it uses the poorer components of crude oil. Mineral oil is currently the most common type of lubricant on the market.

02/13/2025

Advantages and disadvantages of screw refrigeration compressors

Screw refrigeration compressor is a rotary positive displacement compressor. It uses the change of the cogging volume and position of the screw to complete the process of vapor suction, compression and exhaust. Oil-free screw compressors came out in the 1930s, mainly used to compress air. Later, the oil-injected screw compressor appeared in the cylinder,

09/11/2020

Comparison of ball bearings and roller bearings

Comparison of ball bearings and roller bearings From the point of view of the contact with the raceway: Ball bearings are in point contact, and the contact surface is ellipsoid; while roller bearings are in line contact, and when force is applied, the contact surface is square.

09/09/2020

What are the problems of traditional air compressors compared with frequency conversion air compressors

Variable-frequency air compressors have certain advantages in many aspects, so what are the problems of traditional air compressors compared to variable-frequency air compressors? Today I will tell you about the problems of traditional air compressors.

06/29/2020

Several causes of compressor burning