Copeland Compressor ZR38K5-TFZ

08/17/2020

Regulations to be observed in the use of cold rooms in civil cold storage

1. Pozzolanic cement and slag cement mixed with pozzolanic materials shall not be used in the cold room of civil construction cold storage; different types of cement shall not be mixed, and two types of cement shall not be used for the same component.

09/14/2020

Maintenance steps and methods of G series oil and gas separator

1. Disassemble all connecting pipelines connected to the cylinder head and clean the surface dust. 2. Take out the oil return pipe (air compressors below GA90 cannot be removed).

06/14/2020

Refrigeration compressors can be divided into two types

Refrigeration compressors can be divided into two types: volume type and speed type according to their working principles

08/20/2020

Installation and placement conditions of cooling tower of thermal shock tester

Let's learn about the installation and placement conditions of the cooling tower of the thermal shock tester with the editor of okmarts.com! 1. The ground is flat and well ventilated;

08/08/2020

Analysis of performance factors of screw chiller assembly accessories

Screw chillers are widely used in industrial refrigeration in various industries such as plastics, electroplating, pharmaceuticals, chemicals, non-woven fabrics, shoemaking, and lasers.

06/14/2020

How much future does using water as refrigerant

How much future does using water as refrigerant Refrigeration technology is always developing in the direction of high efficiency and environmental protection, but is it very futuristic to use water as a refrigerant?

06/14/2020

Precautions for the operation of cold storage equipment

Precautions for the operation of cold storage equipment 1. For the evaporator of the air-cooled machine: always check the defrosting situation, whether the defrosting is timely and effective, it will affect the cooling effect and cause the liquid return 器2䀀
ￜ皥

06/29/2020

How the compressor works

09/10/2020

Application of FPGA in the position control of DC motor

In a DC motor control system, the controlled quantity is generally the speed of the motor, and the purpose of control is to keep the speed of the motor at the required fixed value. But in the actual production process

07/21/2020

How to protect the refrigeration compressor, you must master the following knowledge!

When the compressor is running, some abnormal conditions may occur, such as: exhaust pressure is too high, suction pressure is too low, oil pressure is insufficient, motor is overheated, excess liquid enters the cylinder, etc. In the event of an abnormal situation, the compressor will be damaged if there is no protective measure.