Daikin Compressor JT100BHV1

07/16/2020

Compressor failure and elimination

The compressor is the heart of the refrigeration system. It sucks low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and discharges high-temperature and high-pressure refrigerant liquid to the exhaust pipe to provide power for the refrigeration cycle.

09/09/2020

Principle of oil bath air filter

The filter is cylindrical, and the cylinder is divided into three parts: the outer cylinder, the inner cylinder, and the air outlet pipe. The upper part of the inner part is a swirling plate (or guide vane) and a filter screen, and the lower part is connected to the outer cylinder, and the bottom of the cylinder is filled with compressor oil (waste oil).

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

02/08/2023

Pros and Cons of Pneumatic, Electric and Hydraulic Actuators

The actuator used in the control valve are nothing more than pneumatic, electric, and hydraulic (electro-hydraulic) type.

06/28/2024

Normally Open vs Normally Closed Solenoid Valve: Understanding the Difference

Solenoid valves are electromechanical devices that play a crucial role in controlling the flow of fluids or gases within a system. They are widely used in various industries, including manufacturing, automotive, HVAC, and agriculture, among others.

09/08/2020

What are the criteria for how to choose an air compressor

When choosing an air compressor, we should actually pay attention to some principles, so that we can compare and choose the ones that are more suitable for us. Today, let's talk about the matters we should pay attention to when choosing an air compressor.

12/12/2022

How to Deal with the Abnormal Noises from the Linear Guideways?

The rolling element on the slider of the linear guideway moving back and forth inside the track groove will produce noise, which is a normal phenomenon.

08/20/2020

What is the difference between fresh-keeping storage, cold storage, freezer and controlled atmosphere storage

1. Fresh-keeping warehouse The storage temperature of the fresh-keeping warehouse is generally 0℃~5℃, which is mainly used to keep fresh, that is, to maintain the original quality and freshness of agricultural products for a long time,

08/05/2020

Do you know all the protective devices for air-cooled chiller refrigeration compressors

In order to prevent the air-cooled chiller from running uninterruptedly for 24 hours, causing the compressor to operate under high load, the electromagnetic switch is not good, the overcurrent caused by the shaft holding,

08/17/2020

Installation process of ground source heat pump heat exchanger

If the machine works for a long time, it will get hot, because once the machine works, it will do work, and the work will naturally generate a lot of heat. If this heat is not released in time, it is likely to damage the machine.