Fuji VFD Frequency Converter FRN2.2F1S-4A912

08/20/2020

How much is the temperature of the industrial chiller to prevent condensation

Condensation water in the industry is mainly caused by the large temperature difference between the ambient temperature and the cooling water temperature of the chiller.

09/18/2020

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them Mineral oil (MineralLubricant) Mineral oil is a lubricating oil extracted from petroleum. The base oil of mineral oil is the bottom oil left over after the fractional distillation of useful light substances (such as aviation oil, gasoline, etc.) during crude oil refining. Into the product. Essentially, it uses the poorer components of crude oil. Mineral oil is currently the most common type of lubricant on the market.

06/29/2020

Compression ratio of American Copeland compressor

04/17/2024

Why Do Servo Motors Fail? 9 Parts that May Malfunction with Pictures

Keeping servo motors running in optimal condition is crucial for any industrial business, especially for industries such as robotics or CNC machine tools, as the cost of downtime caused by servo motor failure can be very expensive, both financially and in terms of time.

07/23/2020

FAQs about refrigeration compressors, do you know these?

Why control the impurity content and moisture content of the compressor and air conditioning system? Impurities entering the friction surface of the moving parts in the compressor pump body will cause abnormal scratches and wear. Impurities entering the solenoid valve, expansion valve, control valve, capillary tube and stop valve in the refrigerator system will block the valve hole or make the valve close tightly. And fail.

08/17/2020

Why can't the cold storage temperature drop The evaporator is very important!

There are many reasons why the temperature of the cold storage cannot drop. The editor of okmarts.com lists the following six common phenomena for your reference:

09/08/2020

The basic theoretical knowledge of air that everyone who uses an air compressor should understand

1 What is air? What is normal air? 　　 Answer: The atmosphere around the earth, we are accustomed to call it air. 　　The air under the specified pressure of 0.1MPa, temperature of 20°C and relative humidity of 36% is normal air. Normal air is different from standard air in temperature and contains moisture. When there is moisture in the air, once the moisture is separated, the air volume will be reduced.

09/03/2021

How to Communicate PLC to VFD

PLC (Programmable Logic Controller) and VFD (Variable Frequency Drive) play an important role in industrial production and technological development.

09/05/2020

Who has the final say on equipment shutdown for maintenance

In enterprises, the equipment should be subject to preventive maintenance. According to the set cycle, the equipment should be shut down for repair. Usually production scheduling has the final say.

08/05/2020

Problems of evaporator defrosting and improvement methods

Although the evaporator is very useful, the evaporator defrosting electric heating tube burned out and the water collecting tray heating chamber burned out successively during use. So I will introduce the problems of the evaporator equipment and analyze the problems.