HENGSTLER Encoder RI58-O/2048AK.42TG

09/21/2020

How to determine and calculate gas consumption

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m3/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor

08/24/2020

Causes of uneven liquid distribution in refrigeration systems and tragic cases!

If the distribution head is not evenly distributed, it will cause too much refrigerant in some of the branches, which will cause the evaporator to frost.

06/29/2020

Compression ratio of American Copeland compressor

08/12/2020

Analysis of refrigeration equipment system operation and introduction of energy-saving measures

1. Economic analysis of refrigeration equipment system operation<br></br> The amount of cold produced by the refrigeration equipment is directly related to the operating conditions of the system.

08/12/2020

Precautions for the use of ultra-low temperature storage boxes

The ultra-low temperature storage box is shipped after more than 12 hours of debugging before leaving the factory. Today, the editor of the ultra-low temperature storage box okmarts.com will share with you, there are some problems that should be paid atte¨ﰨ2䀀湠疨Vǜ

06/18/2020

The main reason for the slow heating of air conditioners

The main reason for the slow heating of air conditioners There are several reasons for the slow heating of air conditioners: 　　 The dirt of the transpiration device and the condenser is too thick, which will cause air flow blockage, affect the heat declaration, and make the air conditioning heating a big discount. The filter is not cleaned for a long time<img src="{{media url=&quot;wysiwyg/The_main_reason_for_the_slow_heating_of_air_conditioners.jpg&quot;}}" alt="" />

08/08/2020

Precautions for operation of cold storage condenser

Precautions for operation of cold storage condenser 1. When the refrigeration system is running, all the other valves of the condenser should be opened except the oil drain valve and the air valve closed.

08/16/2020

Ways to improve the service life of control valves

The control valve is not like a manual valve. After it is installed, it is rarely managed and maintained. It must be maintained frequently to ensure normal operation and long service life. Below we introduce eight ways to extend the service life of the control valve.

09/01/2020

Analysis of heat recovery of oil-free air compressor

1.The working principle of oil-free air compressor cooling The air enters the first-stage low-pressure rotor pressurization and intercooler cooling through the filter, and then enters the second-stage high-pressure rotor pressurization and aftercooler

09/20/2020

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them

Mineral oil (MineralLubricant) Mineral oil is a lubricating oil extracted from petroleum. The base oil of mineral oil is the bottom oil left over after the fractional distillation of useful light substances (such as aviation oil, gasoline, etc.) during crude oil refining. Into the product. Essentially, it uses the poorer components of crude oil. Mineral oil is currently the most common type of lubricant on the market.