Brief description The electronic thermostat measures the temperature via RTD temperature probe, thermocouple, or current 0(4) to 20 mA and can be configured as a simple heating or cooling thermostat depending on the set switching behavior. The timer function can be used to start the thermostat function(heating or cooling) or set a time limit to it. The switching status of the relay and digital outputs as well as the actual value and setpoint value are shown simultaneously in the display. It has a resolution of 64*80 pixels, has background lighting, and can be switched to the national languages German, English, French, and Spanish. The device is operated via 4 keys on the front panel. The electrical connetion is made via terminal blocks with push-in technology. A PhotoMOS relay for limit value monitoring or a digital input for connecting a potential-free contact are avaliable as options. A setup program is available as an accessory for simple configutration, parameterization, and reading out of the data logger. Special features 1. 5 Different measuring input groups available 2.Intuitive operation and configuration on the device or with setup program through USB interface. 3.User level with 8 parameters 4.Dot matrix display 64*80 pixels with 4 national languages 5.Data logger function 6.Service via terminal blocks with push-in technology 7.Connection via terminal blocks with push-in technology 8.10 A relay (changeover contact) 9.Customer-specific linearization in the setuo program 10.Limit value monitoring function 11.Timer function 12.Connection digram retrievable in LCD display