How to improve enterprise safety management

How to improve enterprise safety management

Enterprise safety self-inspection is an important measure for enterprises to implement the main responsibility of safety, and it is also a skill that enterprises must master. However, most enterprises do not know how to check and what to check specifically, and there is no complete safety inspection system.

　　 1. Pay attention to planning

Enterprises should formulate annual safety inspection plans in advance according to the goals and tasks of safety work throughout the year, and conduct safety inspections purposefully to ensure that safety inspections are implemented on a standardized basis to achieve practical results. This is to do a good job in corporate safety inspections. Foundation.

　　 2. Improve effectiveness

　　 The organizer of the safety inspection must fully consider the time of the safety inspection, the personnel participating, the inspection methods and means, the content of the inspection and the purpose to be achieved, and make overall arrangements and know well. For the problems found out, specific measures and plans for implementation and rectification shall be put forward, and the rectification shall be tracked until implementation. Business leaders should participate in inspections to increase the importance of their units to safety inspections, and at the same time, they can solve some major problems on the spot and reduce the phenomenon of squabbling.

　　 3. Pursue scientificity

For the objects to be inspected, such as equipment, human behavior, system implementation, etc., there must be indicators, and quantitative inspections should be implemented as much as possible. Detailed checklists are required for each inspection to determine the object and content of each inspection. , Targeted conduct. Inspectors must be equipped scientifically and must be equipped with necessary inspection and testing instruments, such as gas detectors, electroscopes, voltage measuring instruments, etc., to overcome the "subjective imagination" inspection, avoid going through the process and the form, and use scientific data to speak. You can't speak out of thin air, you have to be able to convince people with reason.

　　 Four, highlight comprehensiveness

The coverage of security inspections should be wide. It is necessary to inspect subordinate departments as well as the departments and departments of the same level departments, so as to be "horizontal to side and vertical to the end"; at the same time, check each unit without leaving Dead ends. The inspection content should be comprehensive, and the implementation of the system should be the focus, especially the implementation of the safety production responsibility system of leaders at all levels and the implementation of various safety production rules and regulations. At the same time, the staff's thought dynamics, safety training, education, etc. should also be checked, remember Safety inspection is not just the investigation and handling of hidden dangers at the scene. It is necessary to understand that hidden dangers in ideology are more terrible than hidden dangers at the scene. It is necessary to conduct comprehensive and whole-process inspections in terms of system, thinking, technology, equipment and facilities, without leaving blind spots. Safety inspection personnel must be comprehensive, and personnel from various departments such as equipment, safety, technology, labor and management, labor unions, and fire protection must participate. It is necessary to overcome the misunderstanding that "safety inspection is the business of the safety department", and achieve specific tasks and clear division of labor. To prevent and cure problems before they happen.

　　 5. Realize flexibility

　　 There are many forms of safety inspection. No matter which form is adopted, the actual effect of safety inspection must be ensured. To change the previous fixed mode, realize the safety inspection methods, methods, and diversity are the key to a good safety inspection. For example, through cross-checks, you can learn from each other and improve together; through surprise inspections, you can understand the actual situation of grassroots safety management in a timely manner, so that you can have a good idea and set a target; through special inspections, you can highlight the key points of safety inspections and implement special governance. Wait.