Introduction to cleaning and maintenance of temperature control valve of okmarts.com air compressor

Introduction to cleaning and maintenance of temperature control valve of okmarts.com air compressor

The composition of the temperature control valve of okmarts.com air compressor: The temperature control valve is composed of valve body, valve core, temperature sensing element, spring, etc.:

2. The function of the temperature control valve: the temperature control valve plays the role of constant temperature control. When the oil temperature measured by the temperature sensing element of the temperature control valve is lower than the action value (the action value of the temperature sensing element is generally 71 degrees), the lubricating oil is directly from When the oil and gas barrel returns to the main engine, when the oil temperature measured by the temperature sensing element of the temperature control valve is higher than the action value, the thimble of the temperature sensing element of the temperature control valve moves and pushes the valve core to open the bypass valve of its own equipment, so that the lubricating oil enters the cooler Cooling (the higher the temperature measured by the temperature sensing element, the greater the opening of the bypass valve), and the cooled lubricating oil will return to the host.

3. Disassembly of the temperature control valve: there is a cover on the surface of the temperature control valve, and there are screw holes on the cover, find a suitable nut to screw in the cover, and then use the circlip pliers to remove the circlip that fixes the cover, and then use it Pull the nut just screwed in with the pliers to take off the cover and all the internal parts.

4. Cleaning the temperature control valve: clean all parts of the temperature control valve according to the method of cleaning the relief valve.

5. Assembling the temperature control valve: install the temperature control valve according to the reverse steps of disassembly.

6. After the entire cleaning process of the temperature control valve is completed, put it aside to be installed in the air compressor