Quality requirements for medical air compressor control

Quality requirements for medical air compressor control

Medical applications have high requirements on machines, requiring precision, greater reliability, environmental protection and quietness, fresh and clean compressed air, and the output gas can directly contact the human body. Medical air compressors with a displacement of less than 1m³/min are mostly micro-screw reciprocating air compressors, also known as silent oil-free air compressors, and also called micro-screw swing air compressors abroad.

　　 1. High air production: refers to the compressed air displacement per unit power, which is a very important indicator, users should make more comparisons when choosing.

　　 2. Exhaust pressure must be up to standard: according to industry standards, it must reach 7 Bar, most of which are 8 Bar.

3. Dry air and cleanliness: application of oil-free lubrication technology, as well as compressor air chamber wall treatment and air storage tank internal spray treatment technology, equipped with a good air filter and oil-water separator to ensure that the output air is cleaner , Fresh. If a non-heat regeneration dryer is installed, it can also ensure that the air is dry and free of water, and at the same time, the output gas is required to directly contact the human body.

　　4. Low noise: Medical air compressors must be controlled within 60 decibels. The sound of general household air-conditioning compressors (about 55 decibels), medical staff will not feel uncomfortable working in such an environment.

Recent related posts

09/09/2020

Quality requirements for medical air compressor control

Medical applications have high requirements on machines, requiring precision, greater reliability, environmental protection and quietness, fresh and clean compressed air, and the output gas can directly contact the human body.

09/09/2020

Selection criteria and skills of oil filters

The quality of hydraulic oil has a great influence on the working performance of the hydraulic system. Many faults are rooted in it. To prevent oil contamination, install a hydraulic oil filter in an appropriate place to trap the contaminants in the oil and keep the oil clean. , To ensure the normal operation of the oil system.

09/09/2020

Several factors that determine the normal displacement of an air compressor

The displacement of an air compressor is actually a manifestation of the quality and efficiency of the equipment to a certain extent, and it is usually affected by several factors.

09/09/2020

Suggestions and countermeasures for enterprises purchasing air compressors

For most companies, although the air compressor equipment for project construction is not a factor considered by the builder, it often becomes an important factor restricting the smooth construction of the project.

09/09/2020

Summary of knowledge points of screw air compressor

Classification of screw air compressor 　　 Screw compressors are also called screw compressors, which are divided into single screw compressors and twin screw compressors. The single screw compressor was developed by Sinn, France in the 1970s.

09/09/2020

Talking about the development process and use situation of Chinese vacuum drying equipment

Since ancient times, humans have been accustomed to drying materials with natural heat sources and natural ventilation. Until now, some rural areas still use solar heat to dry materials. Although these natural methods are energy-saving and environmentally friendly, it is an indisputable fact that production efficiency is low.

09/09/2020

The benefits of the implementation of the screw air compressor heat recovery project for corporate customers

During the long-term continuous operation of the screw air compressor, electrical energy is converted into mechanical energy, and mechanical energy is converted into wind energy. In the process of converting mechanical energy into wind energy, the air is compressed by a strong high pressure, causing its temperature to rise sharply.

09/09/2020

The characteristics of natural gas compressor and the introduction of CNG filling station

The main equipment of CNG filling station consists of compressor unit, metering device, gas purification dryer, gas storage device, charging sequence control panel, gas column, gas vending machine, etc. According to the different functions, it can be divided into three types: standard station, refueling mother station and refueling substation.

09/09/2020

The classification and function of filters

air filter The prototype of 　　 air filter is a respiratory protection device used by people to protect the breath. According to records, as early as the first century in Rome, people used hemp masks for protection when they purified mercury. In the long time since then, air filters have also made progress,

09/09/2020

The composition of air compressor oil

Air compressor coolant, referred to as air compressor oil in the industry, is indispensable for air compressor equipment. Air compressor oil plays a role in lubricating, protecting, reducing friction, sealing, rust prevention, and corrosion during the operation of the air compressor. There are two basic components of compressor oil.