The core problem of compressor oper
Solution to water blowing in air conditioner
The air conditioner indoor unit blows water, the fault is not big, but there are many reasons, and it is troublesome to solve it. Please refer to the description of the following various situations:
1. The drain pipe is blocked. Threaded plastic drain pipes can be squeezed or accumulated at the end of the wall, bend, or inserted into the end, causing poor drainage. In this case, the water produced by the indoor unit cannot be kept, and the sink of the indoor unit of the air conditioner is full After the water will overflow, it will be blown by the fan to produce water spray.
2. The sink of the indoor unit is broken, causing the sink to leak when the water level is low, although the drainage is okay. The leaked water drips onto the wind path and sprays water when it is blown out.
3. There is foreign matter on the back of the evaporator of the indoor unit of the air conditioner, which will make the condensed water produced cannot flow into the sink normally, but will drip directly, dripping onto the fan wheel, and being thrown out by the wind wheel, it will drip.
4. The passage between the auxiliary water tank and the main water tank on the back of the air conditioner indoor unit is blocked, which will cause the water in the auxiliary water tank to overflow directly after it is full, and drip into the wind path, causing water spray.
5. The refrigerant is insufficient and the indoor unit evaporator freezes. At this time, water droplets are generated due to the wind passing through the surface of the ice, and they cannot flow into the sink normally, causing water spray.
6. The fan failure caused insufficient wind speed, and the cold generated by the air conditioner could not be dissipated, causing the condenser to freeze.
7. The filter is too dirty, making the wind speed insufficient, and the coldness produced by the air conditioning cannot be dissipated, causing icing.
