The advantages and disadvantages of the fluorine system and the water system are compared!
Central air-conditioning is mainly divided into two categories: fluorine system and water system, both of which are connected to multiple indoor units by one outdoor unit, and uniformly provide cooling and heating to the room through the corresponding transportation medium. In the principle of air conditioning system, central air conditioning is actually similar to traditional air conditioning for cooling and heating. The system is composed of four parts: compressor, evaporator, expansion valve, and condenser. However, central air conditioning has higher technical content and compressors are better than split air conditioning. More advanced.
Fluorine system central air conditioners are mainly Japanese brands. Daikin, Mitsubishi Electric, Hitachi, and Toshiba are all representatives of fluorine system central air conditioners. Water systems are based on American brands such as Trane, York, Carrier, McQuay, etc. Internationally renowned.
Here is a detailed introduction to the advantages and disadvantages of the central air-conditioning water system and the fluorine system to help you choose the central air-conditioning system faster.
Water machine (water system) refers to the cooling (or heating) water that takes the pipeline (including the room), that is to say, the system with water as the carrier. On the contrary, it is a system with refrigerant (freon) as the carrier.
Disadvantages of water machine (water system):
1. The diameter of the pipe is large, the space is large, and the installation is not convenient;
2. Because the water machine needs the host to cool the water s* in the water pipe first, and then pass the cooled water to the room, the cooling and heating speed is slow.
3. Because the control of the water pipe machine is centralized control, it cannot be completely controlled separately (or frequency conversion) like the fluorine pipe machine (with more auxiliary equipment), so the power consumption is large.
water machine advantages:
Since the temperature of the water pipe is higher than that of the fluorine machine, it absorbs less water, so it has good comfort.
The water machine is suitable for large places that are opened for a long time, such as hotels, shopping malls, workshops and other places.
Fluorine machine (fluorine system) disadvantages:
Because the fluorine tube has a low temperature (high) and a strong ability to absorb moisture in the space, the comfort is poor (dry).
Fluorine machine is suitable for places that need to be opened and closed at any time, such as residences, offices and other places.
Fluorine machine advantages:
1. The pipe diameter is small, the space is small, and the installation is convenient;
2. Because the fluorine tube goes directly to the room and the temperature is low (high), the cooling and heating speed is fast.
3. Because the fluorine tube can be individually controlled by the room (frequency conversion control), it saves electricity and energy.
Fluorine machine vs. water machine, which one is better
1. Comparison of water system and fluorine system function and use effect
Water machine: mainly for cooling and heating. The technology is mature. Good reliability. But the water needs to be anti-corrosion and anti-freezing, and it needs power supply and anti-freezing in winter.
Fluorine machine: good cooling effect, poor heating effect.
2. Comparison of comfort between water system and fluorine system
Water machine: The air temperature control accuracy is average, and the noise effect is small. A wall-hung boiler can be added in winter, which has good comfort and has little effect on air moisture content.
Fluorine machine: The air temperature is controlled with high precision, low noise, poor heating capacity in winter, fast cooling, heating, and general comfort.
3. Comparison of energy saving level between water system and fluorine system
Water machine: Secondary heat exchange, slower heating and cooling speed. The air supply is soft and not dry. The dual compressor model has better energy saving.
Fluorine machine: Because the heat transfer efficiency of refrigerant is several times that of water and air. Therefore, the heat transfer efficiency is high. (Supply cooling capacity on demand) Good energy saving! Due to the fast heating and cooling speed, it will affect the moisture in the air, and it will feel dry if it is opened for a long time.
4. Cost comparison between water system and fluorine system
Water machine: The initial investment is slightly lower. The operation and maintenance of the home central air conditioner is simple, but maintenance by professionals is required.
Fluorine machine: The initial cost is high, and the operation and maintenance are easy. Once fluorine leakage is difficult to repair, the repair cost is very high.
5. Comparison of repair and maintenance of water system and fluorine system
Water machine: The installation workload is large, and the system pipeline needs to be insulated, antifreeze and cleaned.
Fluorine machine: The installation and maintenance workload is small, the system pipe is relatively simple, and the maintenance is low.
6. Comparison of the use area of water system and fluorine system
Water machine: The water machine is suitable for large-sized houses. Generally, houses above 200 square meters use water system central air-conditioning.
Fluorine machine: Fluorine machine is more suitable for houses under 200 square meters.
The advantages and disadvantages of the central air-conditioning fluorine system and the water system are obvious. The choice between the central air-conditioning fluorine system or the water system depends on the individual’s lifestyle. The great advantage of fluorine system central air-conditioning system is "high efficiency", which is inseparable from the geographical environment with small land and large population in Asia, and it has a direct relationship with economic level. What the fluorine system needs to solve is to allow more people to solve the cooling and heating problems in a shorter time and a smaller space.
The water system is different. European and American countries represented by the United States prefer a comfortable and healthy life. Therefore, the central air-conditioning system of the water system is more suitable for large-scale high-end residential families who pursue comfortable taste. Whether you are an Easterner or a Westerner, you can make different choices. It is completely up to you.
The advantages and disadvantages of the fluorine system and the water system are compared!
Recent related posts
-
08/04/2020
The advantages and disadvantages of the fluorine system and the water system are compared!
The advantages and disadvantages of the fluorine system and the water system are compared! Central air-conditioning is mainly divided into two categories: fluorine system and water system, both of which are connected to multiple indoor units by one outdoor unit,
-
08/04/2020
Several important issues that should be paid attention to when installing and debugging the inverter on site
nverter is an electric energy control device that uses the on-off action of power semiconductor devices to transform industrial frequency power into another frequency.
-
08/04/2020
Reasons for unstable temperature of refrigerated truck cargo box
In the transportation of frozen and refrigerated food in large supermarkets, refrigerated trucks must be used as carriers.
-
08/04/2020
Popular Science What is the difference between the cooling and dehumidification modes of air conditioners
It is raining in many places across the country, and the air conditioner, as a must-have item for people to enter the summer, is self-evident. Today's air conditioners have very powerful functions.
-
08/04/2020
Pay attention to four look when buying air conditioners in summer
With the arrival of the hot summer, the sales of household air conditioners have entered the peak season. How to choose a satisfactory air conditioner correctly
-
08/04/2020
HVAC people, have you made these mistakes?
As a HVAC person, constantly summing up experience and accumulating knowledge in the work can be said to be a necessary quality, but as the saying goes, failure is the mother of success.
-
08/04/2020
How to avoid common problems in industrial refrigeration units<br></br>
The chiller is an indispensable part of the pharmaceutical, food, chemical and other industries. Its function is to provide chilled water to equipment or products to achieve the purpose of cooling.
-
08/04/2020
How to accurately choose the power cord of the refrigeration equipment
The installation of refrigeration equipment is a very rigorous work, and its installation situation will affect the work of the machine to a large extent.
-
08/04/2020
How much should the temperature on the refrigerator be set What can be done to ensure cooling and power saving at the same time
There are two ways to set the temperature of the refrigerator, I will talk about them separately. Generally divided into 5 gears (1~5) or 7 gears (1~7), and some even more.
-
08/04/2020
Full analysis of air conditioning automatic control system<br></br>
Which parts of the central air-conditioning system need to be equipped with automatic control?<br></br> Answer: It mainly includes two parts: the host part of the cold and heat source and the end equipment part, which need to be equipped with automatic control systems
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
Danfoss Solenoid Valve Coil or Body 032U5840
HORIBA Conductivity Meter PH33
SUNX Sensor GH-8SE
Sanyo Denki Fan 9G1212HE103
Shimadzu Gear Pump SGP1A32D2H2-R
Fanuc Servo Drive A06B-6240-H308