What are the effects of water quality on water-cooled chillers

What are the effects of water quality on water-cooled chillers

If the cooling performance of water-cooled chillers is to be kept in a stable state, very strict requirements on the water source are required. In the daily use of chillers, if the company does not pay enough attention to the quality of the water source, then various sudden failures will occur during the use of the equipment. If the equipment has more failures, it is difficult for the equipment to efficiently reduce the temperature of the space in a short time. The slower the temperature of the space decreases, the higher the cost of use by the enterprise, which is not conducive to the long-term safe use of the chiller.

　　Any water with too high alkalinity or too high acidity cannot meet the requirements of industrial chillers, and may even cause irreparable corrosive failures after long-term operation of industrial chillers. Therefore, the use of water-cooled chillers must cooperate with the use of high-quality water sources to avoid a large number of equipment failures.

　　First, hardness

　　As water-cooled chillers need to use abundant water sources when running, in the case of poor water quality, even if the chiller runs efficiently, it still cannot achieve the purpose of rapid cooling in a short time. The longer the equipment runs, the more energy it consumes, which affects the normal use of chillers by enterprises, and even leads to the continuous increase in the cost of using chillers, which is not conducive to the long-term stable operation of chillers. Only the water source with suitable hardness can guarantee the stable operation of the chiller. If the water quality is relatively hard, it will affect the operation of the chiller. Especially in the state of high efficiency operation, it is easy to cause various scale problems inside the chiller. After the scale accumulates to a certain level, it will affect the normal use of the chiller.

　　Second, water flow

　　Water flow rate will also affect the stable operation of water-cooled chillers. Too high or too low water flow will restrict the operating efficiency of the equipment and even cause the cooling performance of the chiller to decrease. The ability to continuously increase the water flow within the scope of rationalization can increase the operational safety of the chiller, while avoiding problems such as small water flow that may affect the operation of the chiller and cause irreparable losses.

　　The quality of the water used by the chiller directly affects the stability of the equipment. The operation of water-cooled chillers is inseparable from the water source. The better the quality of the water source, the lower the probability that the enterprise will run the chiller to produce scale. If the threat of scale is eliminated, the industrial chiller will continue to be used, and the scope of equipment operation failure will be effectively reduced.

　　The best effect is the chiller operating in the high-quality water source. Due to water quality problems, industrial chillers often cause different types of failures. okmarts.com recommends improving the water quality of industrial chillers while maintaining a stable water flow, which can effectively improve the production efficiency of chillers and reduce the occurrence of chiller failures. Rate, reduce the cost of enterprise use.