What is the difference between single screw compressor and twin screw compressor
Single-screw and twin-screw manufacturing process of twin-screw is more complicated than single-screw in terms of structure, and the difference in service life and working efficiency is not very big, but the domestic single-screw manufacturing technology is not as mature as double-screw at present. The main problem is to solve the transmission and sealing, that is to say, the single screw is lacking in terms of life and maintenance.
What is the difference between single screw compressor and twin screw compressor
Recent related posts
-
09/05/2020
What is the difference between single screw compressor and twin screw compressor
Single-screw and twin-screw manufacturing process of twin-screw is more complicated than single-screw in terms of structure, and the difference in service life and working efficiency is not very big,
-
09/05/2020
What is the difference between permanent magnet frequency conversion and ordinary frequency conversion
In the current air compressor market, energy saving has become the mainstream word in the industry. Energy-saving air compressors are emerging one after another, and the air compressor frequency conversion control technology is becoming more and more mature.
-
09/05/2020
What is the composition of the often said air compressor station
For air compressors, especially screw air compressors, they cannot be used directly. It is also necessary to establish an air compressor station with corresponding post-processing equipment.
-
09/05/2020
What is the basis for the rated flow when selecting the filter
When selecting a filter, the rated capacity should not be selected according to the diameter of the pipe, but the nominal flow of the filter (nameplate flow) should be selected according to the volumetric flow of the compressed air passing through the filter.
-
09/05/2020
What is a gas source system What are its components
A system composed of equipment that generates, processes, and stores compressed air is called an air source system. A typical air source system usually consists of the following parts: air compressor,
-
09/05/2020
What are the reasons for excessive oil content in exhaust gas and how to deal with it
1) The screw oil level is too high. If the oil level is too high, the fluctuation of the liquid level in the oil and gas barrels during the operation of the unit will cause a large amount of gas to enter the oi
-
09/05/2020
What are the main functions and functions of air compressor post-processing equipment
What are the main functions and functions of air compressor post-processing equipment? In an air compressor system, in addition to an air compressor to produce compressed air, post-processing equipment is also required to cool, dry and purify the air.
-
09/05/2020
What are the energy saving methods for air compressor systems
Facing the challenges of global climate change and environmental ecology, countries and industries in the world are actively taking action to find a way for energy-saving development.
-
09/05/2020
What are the effects of the failure of the internal parts of the screw air compressor on the equipment
How can I quickly diagnose the cause of an air compressor failure? I think only by having a good understanding of the internal structure of the air compressor and understanding the functions and functions of each accessory can we find the cause of the failure in time.
-
09/05/2020
What are the characteristics of the filter material glass fiber
As the most widely used filter material in current high-efficiency and sub-high-efficiency filters, glass fiber has the following characteristics:
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
PHLE Oil Seal G26x34x4
Honeywell Relay HRT-4C-AC12V
PARKER Filter 930162Q
MAHLE Filter LAK709
Schneider Circuit Breaker EZD100E4080N
COSEL Power Supply PMA60F-24