NSK Servo Drive M-ESB-YSB2020A2A00-00.1

07/27/2020

Cause analysis of common failures of compressors with heat transfer oil heating system

Cause analysis of common failures of compressors with heat transfer oil heating system<br></br>

09/04/2020

The advantages and disadvantages of centrifugal air compressors, screw air compressors, and piston air compressors

There are many types of air compressors. The following okmarts.com editor introduces the three most common air compressors, namely centrifugal air compressors, screw air compressors, and piston air compressors, and understands and analyzes their respective advantages and disadvantages.

02/03/2025

FANUC FANUC spindle drive fault diagnosis

The motor does not rotate or the speed is abnormal After starting the spindle drive system, if the main motor does not rotate or the speed is abnormal, the possible causes are as follows

08/21/2020

How important is the installation environment of the refrigeration unit Doing these 4 points is enough!

The refrigeration equipment (compressor unit) is installed in the machine room, and the surrounding environment should be maintained:

09/17/2020

Application of the counting machine

Due to the impact of GMP certification on the pharmaceutical machinery industry, the purchase of equipment by domestic users has shrunk severely in the past one or two years, so that the survival problem facing equipment manufacturing is quite cruel:

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

08/08/2025

Why Refrigeration Compressor Oil Deteriorates & How to Add Oil

The lubricating oil used in a refrigeration compressor can lubricate the friction surface, reduce the friction work, friction heat and avoid wear of the compressor motor.

08/13/2020

Compressor in the industrial chiller system produces wet stroke fault and troubleshooting

In the industrial chiller system, when the compressor sucks in wet steam, frost occurs on the cylinder wall, and the suction temperature and discharge temperature drop significantly. This is the wet stroke of the compressor, commonly known as frost.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

06/14/2020

Introduction of refrigeration compressor structure and working principle

The role of refrigeration compressors in the system In order to be able to continuously cool, the compressor needs to suck the vaporized low-pressure vapor from the evaporator and work on it, compress it into high-pressure superheated vapor, and then d器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧Բ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ