Siemens Transmitter 7ML5007-1AA00-1A

09/09/2024

Types, Structures and Characteristics of Condensers

The condenser is one of the main heat exchange equipment in refrigeration units. Its task is to cool and condense the high-pressure superheated refrigerant vapor discharged

04/14/2025

How to Add Refrigerant to an Air Conditioner: A Step-by-Step Guide

Maintaining the proper refrigerant levels in your air conditioner is crucial to ensure efficient cooling and optimal performance.

07/15/2020

What you need to know about the electrical connection of Copeland refrigeration compressors

Please pay attention to the direction of the terminals in the junction box (single-phase: R, S, C; three-phase: T1, T2, T3). In order to ensure the normal start-up and operation of the Copeland refrigeration compressor, the power supply voltage cannot be lower than 10% of the Copeland compressor rated voltage.

07/22/2020

The fluorine refrigeration compressor is short of oil, how to add it?

When the compressor is running for a period of time, we can judge whether the compressor is short of oil by observing the oil glass. If the oil level in the oil glass is lower than half of the position, then we need to replenish the oil. This article introduces the oil replenishment method of small and medium-sized compressors.

09/02/2020

The difference between centrifugal air compressor and screw air compressor!

Centrifuge and screw air compressor are currently the air compressors with a high market share. Today, I will tell you what are the differences between centrifuges and screw air compressors. I hope this article can help you.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/08/2020

Air compressor three filter replacement method

The three filters of air compressor mainly include: air filter, oil filter, oil and gas separator. The replacement method of each filter element is slightly different, and the replacement method of the three filters of the air compressor is organized for your reference.

03/14/2021

Maintenance of servo drive

1.Maintenance of operating environment of servo driver In order to prolong the service life of the servo driver, the following problems should be paid attention to in the process of use. Temperature, humidity, dust, vibration, input voltage and other factors should be considered for the system environment.

09/06/2020

New type filter for screw compressor-oil bath air filter

In the environment with high dust concentration in the air, the dust removal filter device used by the screw compressor is mostly paper or fiber material. The accumulation of dust particles is easy to block, and frequent shutdowns are required to replace filter materials.

06/14/2020

Refrigeration compressor overheat failure analysis

Refrigeration compressor overheat failure analysis The main reasons for the exhaust temperature overheating are as follows: high return air temperature, large motor heating capacity, high compression ratio, high condensation pressure, and improper refrig器2䀀