There is no price at present, you can Request a Quote
Operation: double-acting, no cushion
Operating pressure: 1 - 10 bar (standard and low temperatures); 0.1 - 10 bar (low friction)
Bore diameter: 125mm
Stroke: 25mm
CAMOZZI Air Cylinder 61M3W125A025
There is no price at present, you can Request a Quote
People who bought this item also viewed
Compact Air Cylinder QJ92-1642-A
CAMOZZI Air Cylinder 61M2P063A0305
SHAKO Air Cylinder IC50B125
Festo Air Cylinder DSNU-50-25-P-A
AirTAC Air Cylinder HRQ7
Festo Air Cylinder DGP-25-160-PPV-A-B
HENGSTLER Encoder RI58-O/4096ES.41KJ
SMC Solenoid Valve VS3115-025GL
Johnson Controls Actuator RA-3103-7326
SMC Proportional Valve ITV2010-32N2N4
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Danfoss Compressor MT64HM6BVE
SIEMENS CPU Module 6AG1212-1HD30-5XB0
Recent related posts
-
08/15/2022
Top 10 Brands of Linear Motors
There are many brands of linear motors in the world. The following are some well-known brands of linear motors from countries and regions like Europe, America, Japan, Asia, etc. Hope it will be helpful to you.
-
06/13/2020
Compressor common fault handling
Compressor common fault handling Foam when starting with liquid When the air-cooled compressor is started, the phenomenon that the lubricating oil in the crankcase blisters violently is called liquid start. The basic reason for starting with liquid is 器2 䀀 ᅵ皥 䖒皦즠Ʋ焬क़ 㲈Ʋ 䌁皦 ᮔDž༬皧然क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱
-
09/09/2020
Principle of oil bath air filter
The filter is cylindrical, and the cylinder is divided into three parts: the outer cylinder, the inner cylinder, and the air outlet pipe. The upper part of the inner part is a swirling plate (or guide vane) and a filter screen, and the lower part is connected to the outer cylinder, and the bottom of the cylinder is filled with compressor oil (waste oil).
-
01/10/2022
How to Choose Pulse, Analog and Communication Control Modes of Servo Motor
There are three control modes of servo motor: pulse, analog and communication. In different application scenarios, how should we choose the control mode of the servo motor
-
06/25/2023
How to Tell if LG Refrigerator Compressor is Bad: Symptoms, Problems, and Solutions
The compressor is the heart of any refrigerator, including LG models. It is responsible for compressing the refrigerant gas and transferring heat from the inside of the refrigerator to the outside.
-
08/18/2020
Air-cooled chiller inspection steps and solutions
Generally, after using the air-cooled chiller for a long period of time, some problems cannot be avoided. If there is a failure, we should carefully check the operating conditions of the various parts of the machine.
-
08/17/2020
Why can't the cold storage temperature drop The evaporator is very important!
There are many reasons why the temperature of the cold storage cannot drop. The editor of okmarts.com lists the following six common phenomena for your reference:
-
09/04/2021
Where is the Throttle Position Sensor Located?
The throttle Position Sensor (TPS), located on the butterfly spindle, is operated by the throttle, and its installation varies according to the structure.
-
06/13/2020
Detailed introduction of common problems in the completion and acceptance steps of the intensive cabinet project
Detailed introduction of common problems in the completion and acceptance steps of the intensive cabinet project 1. Detection after assembly adjustment. After purchasing intensive cabinet products, consumers will first check. At this time, the test is 器2 䀀 ᅵ皥 䖒皦즠Ʋ焬क़ 㲈Ʋ 䌁皦 ᮔDž༬皧然क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦 ᮔDž '鱤džၜ먢䇨珵呈
-
08/07/2020
What should I do if the refrigeration compressor returns oil
During the operation of the system, the lubricating oil is discharged from the compressor along with the refrigerant, and returns to the compressor after the cycle.