Mitsubishi PLC FX0S-20MT

09/14/2020

Application of oil bath air filter in air compressor industry

Cement plants have many production and grinding processes, and the ambient air contains high dust concentrations. The original design of dust removal filter device used in air compressor is mostly paper filter element dust removal.

06/30/2025

Understanding Split System Air Conditioners: Definition, Workings, Pros, Types and More

When it comes to cooling your home or office, split system air conditioners have become increasingly popular. These systems offer efficient and effective cooling while providing comfort and control.

09/08/2020

What equipment should a typical compressed air system include

In addition to the compressor itself, typical compressed air systems often include air post-processing equipment such as dryers, filters, and oil-water separators, which are also critical to the quality of compressed air.

11/26/2021

Why DC 4~20mA is Chosen for Signal Transmission of Transmitters?

In industry, it is necessary to measure all kinds of electric and non electric parameters, such as current, power, temperature, pressure, speed and angle, etc.

06/14/2020

The working principle of refrigeration compressors_The main performance parameters of refrigeration compressors

Working principle of refrigeration compressor

06/29/2020

Compression ratio of American Copeland compressor

04/19/2022

How to Properly Ground The Electromagnetic Flowmeter Under Different Installation Conditions?

Because the output signal of the sensor is very small, it is usually only a few millivolts. In order to improve the anti-interference ability of the instrument, the zero potential in the input circuit must be grounded

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

09/09/2020

Quality requirements for medical air compressor control

Medical applications have high requirements on machines, requiring precision, greater reliability, environmental protection and quietness, fresh and clean compressed air, and the output gas can directly contact the human body.

02/14/2023

The Composition and Working Principle of Reduction Gearbox

Gearbox, also called reducer or gear reducer, is a widely applied reduction transmission mechanism equipment, composed of two or more gears.