Air-conditioning animation, wind system and water system can be understood at a glance!

Air-conditioning animation, wind system and water system can be understood at a glance! First, let's take a few professional and traditional central air conditioning systems 1.Water cooling unit +AHU/FCU

refrigeraAir-conditioning animation compressor，compressor,Mitsubishi Compressor,Bristol Compressor，HITACHI Compressor，Danfoss compressor to solve the problem

2.Air-cooled heat pump + AHU/FCU

3.The wind system under normal conditions

4.Suggestions on operation mode during the new crown period

It looks almost the same as usual, but the main thing is not to return the air or increase the UV sterilization. 5.Cooling tower water system diagram

6.Schematic diagram of heat pump

Water heat source pump

Air heat source pump 7.It is also an air energy heat pump, which recovers part of the condensed heat to produce hot water while cooling.

8.Simultaneous geothermal heating and hot water production mode

9.At the end, the air duct machine sends air from the side and returns air from the bottom.

10.Schematic diagram of fresh air heat exchanger

11.Wall-hung boiler floor heating

12.Air energy heat pump floor heating

13.Floor heating coil circulation

14.Some schematic diagrams of household refrigerant machines

One for five

Household fresh air system

15.The last BIM construction simulation of the refrigeration room

Recent related posts

07/28/2020

Air-conditioning animation, wind system and water system can be understood at a glance!

07/28/2020

Simple and clear-graphic analysis of central air conditioning cleaning

Simple and clear-graphic analysis of central air conditioning cleaning Three steps for central air conditioning cleaning: air outlet first, air return, focus on cleaning the filter 1. Clean the air outlet Adjust the swing leaf of the air outlet panel of the indoor unit to a level, and wipe the outer air outlet of the room with a clean towel. If you want to clean the inner louver, you need to remove the air outlet and clean it.

07/28/2020

Installation arrangement and heat preservation method of branch pipe

The branch pipe is also the central air-conditioning branch pipe, commonly known as the splitter (diverter). As the name implies, it is a pipe with one input but multiple outputs.

07/28/2020

Common faults and solutions of screw chillers

Low voltage overrun protection: Solution: Replace or clean the filter element; clean the suction port filter. Dirty or ice blockage at the inlet of the expansion valve: Solution: Dirty blockage: remove the expansion valve and clean it. Ice blockage: replace the filter drier and run again

07/28/2020

Condenser cleaning judgment, method and operation are all here!

Condensers are prone to scale formation in the pipes after long-term use. If they are not treated in time, these scales will affect the heat exchange effect and cause the condensing temperature of the unit to increase,

07/28/2020

FAQs on refrigeration compressors, do you know these?

Impurities entering the friction surface of the moving parts in the compressor pump body will cause abnormal scratches and wear. Impurities entering the solenoid valve, expansion valve, control valve

07/28/2020

Overview of refrigeration compressor classification

The compressor is the core equipment in the refrigeration system. Only by converting electrical energy into mechanical work and compressing low-temperature and low-pressure gaseous refrigerant into high-temperature and high-pressure gas can the refrigeration cycle be ensured

07/27/2020

Selection and comparison of compressors

1. Piston compressor (the work of the piston compressor is the continuous change of the working volume formed by the cylinder, the valve and the reciprocating piston in the cylinder).　

07/27/2020

The use and maintenance operation of screw unit

Parallel unit: generally composed of the same type of compressor, but also can be composed of different types of compressors. It can be composed of the same type of compressor, or it can be composed of different types of compressors (such as piston machine + screw machine). As shown below:

07/27/2020

The working principle of screw unit and common failure analysis

1. Refrigeration cycle and pressure enthalpy diagram 　　 The refrigeration cycle of a screw chiller can be represented by a pressure-enthalpy diagram. The main state points are shown in the diagram, which will be used in the following discussion.