The reason why the fan of air-cooled chiller does not run

The reason why the fan of air-cooled chiller does not run

In many areas where water sources are lacking, or air-cooled chillers for cooling and cooling of supporting machinery and equipment, after several years of use, such and other small failures may occur. A more common possibility is that the fan of the unit is not running. Therefore, today I will share with you the reasons and solutions for the fans of air-cooled chillers not running.

　　 1. The motor winding of the fan is burnt out. Solution: Replace the motor or rewind the wire set.

　　 2. The belt is damaged. Solution: Replace the belt.

　　 3. The fan relay is burned out. Solution: Replace the relay.

　　 Fourth, the wire connection is loose. Solution: Check and tighten the wire connection.

　　 5. The fan motor bearing is stuck. Solution: Replace the bearing.

　　 The functions of air-cooled chillers and water-cooled chillers are the same. They are both cooling and cooling. The main difference lies in the different cooling methods. The fan of the air-cooled chiller is very important. It is the component that the finned condenser of the air-cooled unit constantly exchanges with the air. Once the heat dissipation is not good, it will directly affect the chiller's failure to cool normally.