Check Valve PrincipleCheck Valve StandardCheck Valve Features

Check Valve Principle|Check Valve Standard|Check Valve Features|Check Valve Function|Check Valve Size

Check valve is also called one-way valve or check valve, its function is to prevent the medium in the pipeline from flowing back. The bottom valve of the pump to close the water is also a check valve.

The valve that opens or closes by the flow and force of the medium to prevent the medium from flowing back is called a check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.

According to the structure of the check valve, it can be divided into three types: lift check valve, swing check valve and butterfly check valve. Lift check valves can be divided into two types: vertical and horizontal. Swing check valves are divided into three types: single, double and multiple. The butterfly check valve is a straight-through type. The above-mentioned check valves can be divided into three types: threaded connection, flange connection and welding.

The following items should be paid attention to when installing the check valve:

1. Do not allow the check valve to bear weight in the pipeline. Large check valves should be independently supported so that they are not affected by the pressure generated by the piping system.

2. When installing, pay attention to the direction of medium flow should be consistent with the arrow direction of the valve body.

3. Lifting vertical flap check valve should be installed on the vertical pipeline.

4. Lifting horizontal flap check valve should be installed on the horizontal pipeline