Copeland compressor valve composition
The air valve is an important part of the compressor and one of the easily damaged parts. Its quality directly affects the compressor's displacement, power consumption and operation reliability. At present, the compressor is developing in a high-speed direction, and the speed is limited. One of the key issues for improvement is the valve. The internal structure of Copeland compressor includes the valve. Let's take a look at the composition of the valve for Copeland compressor.
most sensitive type of vulnerable part, which is the main reason for the failure of Copeland compressor. Therefore, we should give due attention and understanding to avoid the occurrence of valve failure, and to be able to judge and eliminate the failure in time.
Copeland compressor air valve consists of the following structures:
1. Valve seat
The valve seat has a gas passage covered by the valve plate and bears the gas pressure difference between the inside and outside of the working chamber. The Copeland compressor must be repaired in time.
2. Opening and closing components (valves)
The opening and closing of the valve seat channel for the operation to control the gas entering and exiting the working chamber is usually made of a sheet, so it is often called a valve sheet.
3. Lift limiter (valve cover)
The valve cover is used to limit the lifting height (lift) of the valve plate, and is often used as a spring seat, and also as a part of the structure of the Copeland compressor.
4. Spring
The spring is a part that pushes the valve plate to the valve seat when the valve is closed, and suppresses the impact of the valve plate on the lift limiter when the valve plate is opened.
The composition structure of the Copeland compressor valve is the four parts mentioned above. During use, we must pay attention to the protection of the Copeland compressor valve. If the Copeland compressor is found to be malfunctioning, it should be modified in time.
